Kayan aikin Hawk Multi Rip Saw
| Babban ƙarfin mota: | 18.5KW |
| Motar ciyarwa: | 1.5KW |
| Matsakaicin gudun: | 3200 (r/min) |
| Ƙayyadaddun tsinke: | 300mmX3.2mmX2.2mmX(80-100)mm |
| Gudun gani: | Daidaitacce 15 ~ 35 (m/min) |
| Madaidaicin takarda: | <0.2mm/m |
| Diamita na tsintsiya: | 80 ~ 100mm |
| Kaurin yanka: | 3-25 mm |
| Girma: | Tsawon 2.2X Nisa 1.9X Tsawo 1.2 (m) |
| Nauyi: | 2.6 (T) |
Injin yana kunshe da cikakken rufaffiyar jiki da dandamalin ciyarwa da fitarwa.Ana ɗora igiyar gani kai tsaye akan babban mashin ɗin motar, injin ɗin ciyarwa yana motsa shi ta hanyar injin saurin daidaitacce mai daidaitacce, kuma ana iya daidaita abin nadi mai ciyarwa tare, duka injin yana da ƙaramin tsari da ƙirar ci gaba.
Babban fasali:
1, fasaha na ci gaba, amfani da ƙirar software mai girma UKU, babban cibiyar sarrafa gantry, a cikin matakin jagorancin gida;
2, babban madaidaici, sawaye madaidaiciya yana da kyau, zai iya saduwa da buƙatun ƙirar katako na katako, don shimfidar laminate gabaɗaya da SPC bene sawing na iya cimma madaidaiciyar madaidaiciya, tasirin ceton kayan;
3, Kariyar muhalli, an rufe dukkan na'ura gaba ɗaya, ƙurar da aka samar ta kai tsaye ta hanyar tsarin zubar da ƙura, yanayin aiki yana da tsabta.
Sigar fasaha:
1. Girman bene:
- matsakaicin nisa: 1300 mm.
- kauri: 6-20 mm.
2. Bayanin kayan aiki na asali:
- Babban madaidaicin chrome plated spindle tare da diamita na 80 mm da haɗin gwiwa biyu; Diamita na spindle shine 100 mm lokacin amfani da hannun rigar hydraulic shaft.
- 18.5 kw.
- abin nadi na sama na roba shine abin nadi, kuma ƙaramin abin nadi shine nadi mai ƙarfi chromium karfe.
- na'urar cire ƙura ta ciki.
- yankan ruwan wukake, na'urar bugun tsiya da matsewa.
- na'urar motsa jiki ta tsakiya.
3. Saurin layin samarwa:
-25-35m/min.
Layin Yankan Kayayyakin Hawk High Performance Auto yana haɗuwa tare da HKJ900 Multi Rip Saw, Injin tuƙi na Vacuum da HKC6 Cross Cut saw.Layin Yankan Haɗin Kai na Hawk ya dace da babban sauri, daidaitaccen yanka da daidaita manyan faranti, kuma ya fi dacewa da ƙarancin kauri kamar ƙasan SPC mai bushewa da bene na LVT maimakon injin naushi.Ƙirƙirar ganga na HKJ900 yana fita da na'urar daidaitawa mai zaman kanta yana gane saurin maye gurbin sawn ruwa da saurin juyawa na ƙayyadaddun bene.Yanayin haɗin samar da atomatik na iya gane saurin yankewar mita 40 a minti daya kuma yana rage yawan farashin samarwa
Layin Yankan Aiki Mai Girma Hawk:
1. Babban inganci, gudun shine 15-18 inji mai kwakwalwa / min.
2.High madaidaici, madaidaiciyar panel da aka sarrafa a cikin 0.05-0.10mm / m.
3.Separate tsarin don saw ruwa da mota, don haka zai iya sauri da kuma sauƙi canza daban-daban samfurin bayani dalla-dalla.
4.Touch allo sets, da servo motor sarrafa motsi na saw ruwa, sauki aiki, high daidaici.
5.Cutting mold baya bukatar, zai iya ajiye kudin da settling lokaci.
6.Cut da kayayyakin da naushi latsa ba zai iya aiwatar (Ya hada da takamaiman kayayyakin lalacewa ta hanyar kauri, tsawo da taurin).
7.Batch tsari, ƙasa da yanki zama.
8.Realize aiki da kai na ci gaba da samfurin, rage yawan aiki.
| HKJ900 | HKC6 | |
| Spindle ikon motsa jiki | 5,5kw | 4.0kw |
| Wutar lantarki ta gani | 8*5.0kw | 3*5.0kw |
| Saw ruwa mota gudun | 2500 - 5200rpm (juyawa juzu'i) | 2500 - 5200rpm (juyawa juzu'i) |
| Yanayin daidaita tazara mai gani | Daidaita dijital ta allon taɓawa | Daidaita dijital ta allon taɓawa |
| Gani daidai daidaita tazarar ruwa | ± 0.015mm | ± 0.015mm |
| Ga diamita na ruwa | 300-320 mm | 300-320 mm |
| Diamita na rami a cikin ledar gani | mm 140 | mm 140 |
| Ga kauri | 1.8-3 mm | 1.8-3 mm |
| Daidaita kewayon zato dagawa | -10-70mm (Dauki jirgin aiki a matsayin tunani) | -- |
| Gani na ɗaga ruwa daidaita yanayin | Daidaita dijital ta allon taɓawa | -- |
| Gudun farantin karfe | 5 - 40m/min (juyawa mai yawa) | 5 - 40m/min (juyawa mai yawa) |
| Sawing farantin kauri | 2-20 mm | 2-20 mm |
| Matsakaicin faɗin farantin gani | 1350 mm | 600mm |
| Tsawon tsayin farantin gani | 500-2400 mm | 2400mm |
| Babban nauyin kayan aiki | ≈5.5T | ≈3.5T |
Samfura masu alaƙa
-
Injin Hawk Uku Rip Saw
Sigar fasaha Ƙarfin Mota: 3* 4KW Motar ciyarwa: 1.5KW Matsakaicin saurin: 2980 (r / min) Ƙayyadaddun ƙayyadaddun ruwa: 300mmX3.2mmX2.2mmX40mm Saurin gani: Daidaitacce 15 ~ 35 (m / min) Kauri mai tsayi: 3-25mm Dimensions : 1160mm * 2960mm * 1140mm Weight: 2.1 (T) Injin Hawk Uku Rip Saw ya ƙunshi cikakken jikin da ke rufewa da dandamalin ciyarwa da fitarwa....
